Pro70[e] #9160

Pro70wa #9160wa


Sold as ECU Only!

SKU: 9160 Category:
Delivery and return
Delivery and return

Next day delivery in store

Buy before 6pm to receive your order next day.

Next day delivery

Orders before 6pm from Monday to Saturday (or before 1pm on Sunday) will be delivered Next working day (except Northern Ireland and Highlands). Orders placed after 6pm (after 1pm on Sunday) or for Northern Ireland and Highlands will be delivered in 2 working days.
29 USD

Drop Point

In 2-3 working days. Pick up your parcel in one of the many diferent collection points available and during a wide range of hours.
39 USD

Same day delivery in London:

Place your order before 13:00 to get it today!. If you order later on, you’ll receive it the next day and if you order on Sunday, you’ll receive it the next working day.
59 USD
Shipping Information
Shipping Information


Complimentary ground shipping within 1 to 7 business days In-store collection available within 1 to 7 business days Next-day and Express delivery options also available Purchases are delivered in an orange box tied with a Bolduc ribbon, with the exception of certain items See the delivery FAQs for details on shipping methods, costs and delivery times
Composition and care
Composition and care

Characteristics of wood :

  • Hard, compact , fiberous and porous
  • Good wood gives a rich, warm and beautiful surface.

Wood is used for the construction of:

  • Floor, Furniture, Walls
  • Incidental furnishing (lampshades, picture frames)
  • Kitchen & restaurant ware


Pro70 Specs: Pro70w Specs:
 80mz Processor  80mz Processor
 Environmental – Meets J1113  Environmental – Meets J1113 
Voltage 8v to 32v Operating Range Voltage 8v to 32v Operating Range
25 Inputs/26 Outputs 25 Inputs/26 Outputs
Crank Input VR/Digital Crank Input VR/Digital
CAM Input Digital (up to 2 cams) 1 CAM Input Digital
Up to 19 Analog inputs 18 Analog Input
Up to 5 Digital Inputs Up to 5 Digital Inputs
1 Frequency input  1 Frequency input 
2 Knock Sensors 2 Knock Sensors
4 Peak and Hold Injectors + 2 Saturated Injectors [Total of 6 Injectors] 4 (7amp) Peak and Hold Injectors
6 EST Ignition Outputs 6 EST Ignition Outputs
9 Low Side Outputs 7 Low Side Outputs
1 H-Bridge 1 H-Bridge
2 CAN 2.0 Channels 2 CAN 2.0 Channels
1 Speed Input  1 LSU 4.9 or NTK Wideband – No Speed Input
4 Switch Inputs (non-frequency) 4 Switch Inputs (non-frequency)
3 Lamps (low current output) 3 Lamps (low current output)


Boost Control 
Electronic Throttle (DBW)
Air Conditioning 
Tachometer drive
Drivers Information Light (DIL/shift light)
Idle air control motor 

Manifold Pressure
Coolant Temp
Air Temp
Oil Temp (Spare if unused)
Clutch switch (two step antilag)(Spare if unused)
Single EGT sensor(Spare if unused)
Manifold Surface Temp(Spare if unused)
Fuel Pressure
Exhaust BackPressure(Spare if unused)
I-Boost Control(Spare if unused)
Nitrous Request(Spare if unused)
A/C Request(Spare if unused)
Knock Control

Environmental Specifications

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Professional EFI Systems Inc. product.


In many states, it is unlawful to tamper with your vehicle’s emissions equipment. Professional EFI Systems Inc. products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles. Only and may never be used on a public road or highway. Using Professional EFI Systems Inc. products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists. (more information can be found on www.semasan.com/emissions for state by state details in the USA)