$1,498.06

The Pro112 is the most economical, robust ECU on the market with tons of processing power, plenty of input monitoring and output to handle most builds.

 

Sold as ECU Only!

Description

Processor The Pro112 uses the industry leading superfast MPC5554 80mhz Processor
Injectors 8 Saturated Injector Drivers (peak and hold injectors must use a resistor pack on this ECU)
Coils 8
TPS Yes – Adaptive
Coolant Temp Yes
Air Temp Yes
Map Sensor Yes – Unlimited Range
MAF Sensor Yes – Frequency and Voltage
Idle Control Pulse Width and Stepper motor – Adaptive
Wideband O2 Uses CAN Based UEGO Control (External capable)
Cam Yes – Hall/Digital Only VR Cam Sensors must use converter box Part #9033
Crank Yes – Hall/VR capable
Variable Cam Yes 4 cam capable
Knock Channels 2 Programmable frequency and event with individual cylinder notification
Flex Fuel Capability Add a Flex fuel sensor, and the computer automatically adjusts fuel, timing, and boost based on Ethanol content! Multiple Failsafes!
Nitrous Control 4 stages multiple event trigger control range. V.E. based fueling****
Boost Control Most comprehensive and easy to use Antilag on the market bar none! Change your target with no re-tuning, set targets below spring pressure…no problem! Multiple control strategies.***
Rolling AntiLag Control Speed based capture (no preset rpm or speed…press it and go)
Rev Limiters Multiple – Burnout, Stage, TwoStep, Rolling Antilag (True RPM capture at ANY Speed) All tied to separate boost targets!
Traction Control Multiple control strategies, most advanced traction control system on the market.***
Launch Control Comprehensive Launch Control Strategies to get the most powerful cars down the nastiest tracks!
Valet Modes Two Stages – Tied to Fault management – Power Reduction, Speed limited etc.. No laptop connection required to active or deactivate, calibratable procedure
Drive Off Assist Drive Off limiters to help with light rotating mass and grabby clutches
Fuel Pump Control Yes, multiple staged pumps and pulse driven pumps*
Analog Inputs 34* Fuel Pressure monitoring and feedback correction, Oil Pressure, Exhaust Backpressure Feedback and correction, and much more.
Low Side Outputs 14 total – 4-7amp capable – 6-700ma capable, 2 1amp capable, 2 350ma capable, 1 100ma capable. 4 of these are PW capable (LS2, LS8, LS9, LS10)*
Tach Yes – Software configurable
Digital Inputs 3 channels (Not including Cam/Crank inputs)- Fully programmable pre configured
High Current Bridges 2 channel sets – Used for Stepper motor control, or Electronic Throttle Control
Drive By Wire Yes – Dual capable*
Fault Coding Safety Yes**
MIL (CEL) Yes – Malfunction indicator with fault codes
Main Relay Control Yes
5v Ref 2 locations
Sensor Grounds 2 locations
Key Switch Power Yes
Permanent Power Yes
Battery Backup No – Not needed – Stored permanently!
Chassis Ground 3 Locations
Can Channels 3 Channels
RS485 Connection Yes*****
Internal Memory Limited to Fault logic
USB Direct Connection No
Laptop Connection USB

Environmental Specifications

Logging with PC attached included on all ECU’s. If logging without the PC connected is required, you must purchase one of the external loggers. This module simply connects through the CAN bus and is configurable, however it is preconfigured by Pro EFI for common channels to be logged

  1. The amount of available channels is dependent upon the use of pre configured I/O such as Fuel pump, TPS, etc…
  2. Fault coding is a strategy used by the O.E. manufacturers. This strategy allows for the capability to trigger faults and fault actions. Features include but are not limited to multiple safety strategies for limiting boost and shutting off nitrous control under lean conditions. See your Authorized Professional EFI Dealer for more information.
  3. Multiple Strategies are configurable based upon time or speed. See your Authorized Professional EFI Systems Dealer for more information.
  4. V.E. stands for volumetric efficiency. This is a strategy incorporated by the O.E. manufacturers to more accurately determine the fueling requirements of the engine. There are several advantages to using this method. See your Authorized Professional EFI Systems Dealer for more information.
  5. These communication ports are dedicated for the use of future external peripherals to be announced by Professional EFI Systems at a later date.

Adaptive – Is a term meaning that particular feature will self tune itself constantly. This is another strategy used by the O.E. manufacturers to help keep the vehicle in a constant state of tune for hundreds of thousands of miles.

——————————————————————————————————————————–

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Professional EFI Systems Inc. product.

IMPORTANT EMISSIONS NOTICE:

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. Professional EFI Systems Inc. products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Professional EFI Systems Inc. products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists. (more information can be found on www.semasan.com/emissions for state by state details in the USA)

Refund Policy
Refund Policy

Refund Policy:

  • 1. No Refunds: ProEFI shall repair or replace any unit or product or part of such Goods that prove to be a manufacture’s defective. The Buyer will be assumed to have accepted the Goods unconditionally unless a claim that a Good is defective is made within 7 days from the date of delivery. These are electronic components and it is assumed that the buyer is competent in the installation process and use of such goods, and misuse can easily and instantly lead to damage of said product. Therefore, no refunds are allowed once received.
  • 2. Return/Refund Policy: Goods delivered not as described to the Client may be exchanged for the correct product within 15 days. Incorrect products ordered by the customer will be subject to a 20% restocking fee applied to any refund. If product packaging is missing or damaged, additional fees may apply. Stocking parts will be credited or exchanged with no fee. Custom ordered parts will not be refunded or credited back.
    • 2.1. Goods not as Described: Only goods delivered in the following condition will be considered not as described: Incorrect parts shipped by ProEFI (not as ordered) will be exchanged by ProEFI at ProEFI’s expense.
  • 3. Warranty Policy: No refunds will be provided for the Goods delivered as described in the contract. Electronic Goods delivered are warranted to be free from defects in materials or workmanship for a period of 1 year from the date of purchase. Wiring harnesses have no warranty past 7 days from the date of delivery. If wiring harnesses are proven to be defective, those parts can be shipped back to ProEFI for repair or exchange (if within 7 days).
Shipping & Returns
Shipping & Returns

SHIPPING & RETURNS

When Will My Order Ship?
Shipments vary based on product purchased. Ranging from same day up to 4-5 business days. [In any case, our Sales Team will be in touch to update you throughout the order placement/order shipped]

How will my order be shipped?
All orders are shipped via FedEx Ground with Tracking number included. Once shipped, orders typically arrive within 3-5 business days.

If you need faster shipping, please email Sales@ProEFI.com with your reference number and date needed by. Our team will follow up with you.

Returns-
If the product(s) was purchased through an authorized Professional EFI Systems dealer, returns must be made through that Authorized ProEFI Dealer.

Products purchased from Proefi.com, please email Sales@proefi.com, with your contact information, order no. from purchase, and reason for return.

For Return and Exchange Options for Online- Direct Purchases Through ProEFI: https://proefi.com/emission-disclaimer/