↑ Return to Media

Featured Articles

Featured Articles

The Links below explain some of the key features that set ProEFI apart from the competition. ProEFI is dedicated to providing state of the art technology to monitor and protect your engine from damage.

Adaptive Learning

Adaptive Learning Adaptive Learning is a strategy used by O.E.M. automotive manufacturers to maintain long term tuning accuracy.  This strategy allows for continuously changing climate conditions to be constantly compensated for by the ECU. This strategy is vastly different from closed loop type control systems. While Closed Loop and Adaptive Learning work together, with Closed …

View page »

Fault Management

Fault Management Fault Managementis a strategy used by the O.E.M. vehicle manufacturers for years to help protect the vehicles powertrain. The tuner has access to numerous conditions the Powertrain controller is always monitoring. This allows the tuner to setup minimum and maximum operating conditions of the powertrain. If any of these conditions are exceeded or …

View page »

Knock Control

Knock Control There are several ways to approach Knock control. Some manufacturers use more of a noise control than a knock control system. These systems use the knock sensor with a non specific band pass filter to filter out some back ground frequencies. Then a user defined table is used to limit the amount of …

View page »

Traction Control

Traction Control ProEFI’s state of the art traction control provides the flexibility to be used in any racing venue. The tuner can set up the traction control to be front and rear wheel slip differential, driveshaft/vehicle speed dependent, or based upon the engines rate of acceleration in each gear. Wheel Speed Differential– The wheel speed …

View page »